Coca Cola Film Label Flexographic Printing Machine
1. Characteristic
1,The machine introduction & absorption of European technology / process manufacturing, supporting /
full functional, has the following features:
After mounting the plate and registration, no longer need registration, improve yield;
Replacing 1 set of Plate Roller (unloaded 6pcs old roller, installed six new roller after tightening),
only 20 Minute registration can be done by printing;
The machine first mount plate, pre-trapping function, to be completed in advance prepress
trapping in the shortest possible time.
Maximum production machine speed up 200m/min, registration accuracy ±0.15mm.
The overlay accuracy does not change during lifting running speed up or down.
When machine stop, Tension can be maintained, the substrate is not deviation shift;
The whole production line from the reel to put the finished product to achieve non-stop continuous
production, maximize product yield;
With precision structural, easy operation, easy maintenance, high degree of automation and so on, only
one person can operate.
- Suitable Printing Material:
- Printing Material:
1. Plastic film: Shrink film, BOPP/PET/PE/NY/PP,(3-40MICRON) ect.
2. Paper: adhesive paper/ thin paper, ect (50-400 g/)
3.Non Woven Fabric :40-120gsm
Suit to roll paper with good performance, it print continuously with beauty quality.
2.2 About Material:
- Material width: MAX 600mm
- Diameter: MAXф800mm, Unwind and Rewind: 3″( by Air shaft)
Above material adopts: water-based ink, alcohol solvent environment protection ink, and photopolymer plate.
machine pic.
contact person:
LINDA +8615258016098
welcome received your inquiry
){kind=link}
){kind=link}